TÉLÉCHARGER PAINTERLY PACK 1.4.2 GRATUIT
| Nom: | painterly pack 1.4.2 |
| Format: | Fichier D'archive |
| Système d'exploitation: | Windows, Mac, Android, iOS |
| Licence: | Usage Personnel Seulement |
| Taille: | 62.26 MBytes |
Comment garantir la perennité de ses productions e-learning selon Inovae? Alongside the early 15th century south lobby there is a stair tower to reach upper rooms, roofs and battlements. Augustinus, Sermones or Cicero, Letters. Télécharger Foto artis yang tercantik di dunia In some cases this material would best be treated in a separate msPart element see 1. The custodialHist record is used to describe the custodial history of a manuscript, recording any significant events noted during the period that it has been located within its holding institution.
This Reference Guide defines an XML format for the structure of the data which all ENRICH partners will contribute to the Manuscriptorium, either directly or indirectly by means of a harvester or transformation process. The format is formally expressed by a schema which is generated from the XML source of this guide. The guide itself is a conformant subset of Release 1.
Within Manuscriptorium, only the first two are required. However, the schema documented here also provides for the third, in the interest of completeness and for the assistance of ENRICH partners wishing to provide richer access facilities to their holdings.
The remainder of this Guide describes each of these aspects in more detail, using material derived from the P5 release of the TEI Guidelines. Other header components, if present, will be ignored by Manuscriptorium; they will be retained for storage in the system and returned on request, but their content is not processed for any purpose, and they may not be visible for searching purposes.
The value for xml: It painteely however be prefixed by an identifier for the partner concerned, so as to avoid possible identifier collisions.
If no value is supplied, the assumption is that the language of the description is English. The first of these components, msIdentifieris mandatory; it is described in more detail in 1.
It is followed by either one or more paragraphs, marked up as a series of p elements, or one or more of the specialized elements msContents 1. These elements are all optional, but if used they must appear in the order given here. Finally, in the case of a composite manuscript, a full description may also contain one or more msPart elements 1. The dimensions element pzck normally occur within the element describing the particular feature or aspect of a manuscript whose dimensions are being given; thus the size of the leaves would be specified within the support or extent element part of the physDesc element discussed in 1.
The type attribute on the dimensions element is used to specify more exactly the item being measured. Attributes minmaxand scope are used only when the measurement applies to several items, for example the size of many or all the leaves in a manuscript; attributes atLeast and atMost are used when the measurement applies to a single item, for example the size of a specific codex, but has had to be estimated.
The units in which dimensions are measured should always be specified using the unit attribute, which will normally be taken from a closed set of values appropriate to the project, using standard pck of measurement wherever possible.
If the only data available for the measurement uses some other unit, or it is preferred to normalize it in some other way, then it may be supplied as a string value using the paimterly attribute.
The content of these elements, if present, simply copies the way that the measurement is presented in some source text; it may be omitted.
The locus element is used to reference a single location within a manuscript, typically to specify the location occupied by the element within which it appears.
If for example it is used as the first component of an msItem element, or of any of the more specific elements appearing within one see further section 1. Alternatively, the key attribute may be used to supply an identifying code for the person referenced by the name independently of both the existence of a person element and the use of the standard URI reference mechanism. Although such practices clearly reduce the interchangeability of the resulting encoded texts, they may be judged more convenient or practical in certain situations.
All the person elements referenced by a particular paihterly set should be collected together within a listPerson element, located in the TEI Header. This functions as a kind of prosopography for all the people referenced by the set of manuscripts being described, in much the same way as a listBibl element in the back matter may be used to hold bibliographic information for pzck the works referenced. Similar mechanisms are used to maintain and reference canonical lists of places paiinterly organizations.
A manuscript's actual physical location may occasionally be different from its place of ownership; at Cambridge University, for example, manuscripts owned by various colleges are kept in the central University Library.
Normally, it is the ownership of the manuscript paintrely should be specified in the manuscript identifier, while additional or more precise information on the physical location of the manuscript can be given within the adminInfo element, discussed in section 1. At least one of the elements listed above must be given within the msIdentifier and they must, if present, appear in the order given.
Like namethese paintery are all also members of the attribute class att. As mentioned above, the smallest possible description is one that contains only the element msIdentifier ; good practice in all but exceptional circumstances requires the presence within it panterly the three sub-elements settlementpainteroyand idnosince they provide what is, by common consent, the minimum amount of information necessary to identify a manuscript.
Phrase-level elements, such as titlenamedateor the specialized elements origPlace and origDatecan also be used within a head element, but it should be remembered that the head element is intended principally to contain a heading. More structured information concerning the contents, physical form, or history of the manuscript should be given within the specialized elements described below, msContents 1.4.22, physDeschistoryetc. However, in simple cases, the p element may also be used to supply painteroy unstructured collection of such information, as in the example given above 1 Manuscript Description Metadata.
Ppack discrete item in a manuscript or manuscript part can be described within a distinct msItem and may be classified using paijterly class attribute. In addition, an msItem may contain nested msItem elements. Untagged running text is not permitted directly within an msItemunless it is given within a p element, in which case none of the other component elements listed above is permitted. When used within a manuscript description, the title element should be used to supply a regularized form of the item's title, as distinct from any rubric quoted from the manuscript.
If the item concerned has a standardized distinctive title, e. Roman de la Rosethen this should be the form given as content of the title element, with the value of the type attribute given as uniform.
Similarly, if used within a manuscript paiterly, the author element should always contain the normalized form of an author's name, irrespective of how or whether this form of the name is cited in the manuscript. If it is desired to retain the form paack the author's name as given in the manuscript, this should be given in the docAuthor element, or as a distinct name element, within the text at the point where it occurs.
Note that the key or ref attributes can be used, on titles and on author names as on names in general, to link the name to a more detailed description of the person or work concerned see further 1.
The form and scope of language identifiers recommended by these Guidelines is based on the IANA standard described at http: Where additional detail is needed correctly to describe a language, or packk discuss its deployment in a given text, this should be done using the langUsage element in the TEI Header, within which individual language elements document the languages used: Most manuscript descriptions touch on several of these categories of information though few include them all, and not all distinguish them as clearly as we propose here.
In particular, it is often the case that an existing description will include within a single paragraph, or even sentence, information for which we propose distinct elements. In this case, if rewriting is not an option, the existing prose must be marked up simply as a series of p elements, directly within the physDesc element.
The physDesc element may thus be used in either of two distinct ways. It may contain a series of paragraphs addressing topics listed above and similar ones. Alternatively, it may act as a container for any choice of the more painterl elements described in the remainder of this section, each of which itself contains a series of paragraphs, and may also have more specific attributes. If the two ways are combined in a single description, care should be taken to avoid duplication and all paragraphs of generic description must precede the first of the more specialised elements.
Each of these elements contains paragraphs relating to the topic concerned. Within these paragraphs, phrase-level elements in painferly those discussed above at 1. This example combines information which might alternatively be more precisely tagged using the more specific elements described in the following subsections. Where the layout element is used, the layout will often be sufficiently regular for the attributes on this element to convey all that is necessary; more usually however a more detailed treatment will be required.
The attributes are provided as a convenient shorthand for commonly occurring cases, and should not be used except where the layout is regular. The value NA not-applicable should be used paintrly cases where the layout is either very irregular, or where it cannot be characterized simply in terms of lines and columns, for example, where blocks of commentary and text are arranged in a regular but complex pattern on each page.
Note the use of the term element to mark specific technical terms within the context of the handDesc element.
Topic Liste des pack de texture pour la 1.4.2 - Page 2
As the above example shows, the attributes script and scope are both required on handNote. The locus element, discussed in section 1. In addition, when a full or partial transcription of paintterly manuscript is available in addition to the manuscript description, the handShift element described in http: It can be difficult to draw a clear distinction between aspects of a manuscript which are purely physical and those which form part of its intellectual content.
This is particularly true of illuminations and other forms of decoration in a manuscript. We propose the following elements for the purpose of delimiting discussion of these aspects within a manuscript description, and for convenience locate them all within the physical description, despite the fact pzinterly the illustrative features of 1.4. manuscript will in many cases also be seen as constitutiing part of its intellectual content. Information about the origins of the pac, its place and date of writing, should be given as one or more paragraphs contained by a single paniterly element; following this, any available information on distinct stages in the history of the manuscript before its acquisition by its current holding paihterly should be included as paragraphs within one or 1.42.
provenance elements. Finally, any information specific to the means by which the manuscript was acquired by its present owners should be given as paragraphs within the acquisition element. The surrogates element should not be used to describe digital images of the manuscript since the facsimile element described in 2 Metadata about digital facsimiles is provided for this purpose. None of the constituent elements of additional is required.
If any is supplied, it may appear once only; furthermore, the order in which elements are supplied should be as specified above. The status attribute of availability must take one of the following values: The change element within the revisionDesc element of the TEI Header should be used to document the revision history of the record. It should not be given within the recordHist element.
For ENRICH purposes, information about digital images of the manuscript being described should be provided paintrely the facsimile element discussed in section 2 Metadata about digital facsimiles below rather than within the surrogates element. The facsimile element is used to describe the digital images of the manuscript being made available to the ENRICH project.
MINECRAFT PAINTERLY TEXTURE PACK
It contains, as a minimum, one surface element for each distinct page image, which in turn specifies one or more graphic element. These elements are used as described in the TEI Guidelines, section This example defines only two pages. There are three images associated with the first page, which is represented by the surface element with unique identifier LSB-1rand two with the second, which has no identifier. Each image is represented by means of a TEI graphic element. As well as acting as a container for the various images associated with a page, the surface element defines an abstract co-ordinate system which may be used when defining additional zones of interest on the page.
In this example, the location of an initial letter on the page is defined, since we have painherly graphic representing this detail. The zone within which the initial letter falls is in the box defined by the co-ordinates 20,20,70,70 within a grid defined by the co-ordinates 0,0, Thus, 1.4.2 the surface depicted actually measured by mm, the initial letter would occupy a 50 X 50 mm square, with its upper left corner located 20 mm from the left and 20 mm from the top edges of the surface.
Note however that the numbers used to express co-ordinates are not measurements in any specific units painterlyy should not be used to determine the actual image size, since these may in any case vary greatly: The mimeType paco is painteerly to indicate the ;ainterly of paintfrly graphic file itself, and may be any valid MIME type, as defined by the IANA, for example jpeg14.2bmptiff etc.
The decls attribute is used to indicate an external URI from which further metadata applicable to this image may be found. In this case we are assuming that there is a definition which can be used to indicate characteristics of a thumbnail image at the address indicated.
Note that this must be given in full, since it would otherwise be interpreted as an address relative to the value of the xml: We include in the schema the four basic key TEI modules headercoreteiand textstructure. We also include five specialized modules: All the elements and attributes defined by these modules are included in the ENRICH schema, with the following modifications. Firstly, several unwanted elements are deleted. Secondly, some optional attributes have been made compulsory, and their range of possible values are constrained.
Finally, the content model for a small number of elements has been simplified pck remove unwanted alternatives. The following elements are deleted: On the altIdentifier element, the type attribute is compulsory, and must take one of the following values: On the availability element, the status attribute is compulsory, and must take one of the following values:
Комментарии
Отправить комментарий